What a scale means
A scale drawing is a picture of something real, drawn so that every length is reduced (or enlarged) by the same factor. A map, a floor plan and a model aeroplane are all scale drawings. The scale tells you how to get from the drawing to real life.
The two ways a scale is written
As a ratio: 1 : n
1 : 50 000 means 1 unit on the drawing represents 50 000 of the same units in real life. There are no units written down, because it works for any unit: 1 cm represents 50 000 cm, and 1 inch would represent 50 000 inches.
The number n is called the scale factor.
In words: “1 cm represents 2 km”
Here the units are different on the two sides, which is much friendlier for a map. To turn it back into a ratio you must first make the units match:
The same house, drawn to a scale of 1 cm to 2 m
Example 1A map has a scale of 1 : 25 000. Write this scale in the form “1 cm represents …”, in metres and in kilometres.
Converting in both directions
Only two operations exist, and choosing the right one is the whole battle.
Drawing → real
You are making things bigger, so multiply.
Real → drawing
You are making things smaller, so divide.
Example 2A map is drawn to a scale of 1 : 50 000. (a) Two villages are 7.4 cm apart on the map. Find the real distance in km. (b) A straight road is 12 km long. How long is it on the map?
Scale converter
Set the scale either way, choose a direction, and read off the whole unit chain the examiner wants to see. Switch to Area to watch the factor get squared.
Choosing a scale and making the drawing
If a question says “choose a suitable scale”, you get the marks for a scale that makes the drawing as large as possible while still fitting the space, and that is easy to work with.
How to choose a scale in three moves
- Find the largest real length you must draw.
- Divide it by the space available: this is the smallest number of real units each centimetre must carry.
- Round that up to a friendly number — 1, 2, 5, 10, 20, 50, 100, 200, 500, …
Drawing accurately
For a construction question the examiner is checking your ruler and protractor, so accuracy marks are usually within ±2 mm and ±2°. Always write the scale on your drawing, label every vertex, and leave your construction lines showing.
Example 3A triangular field ABC has AB = 40 m, AC = 30 m and angle BAC = 55°. (a) Choose a suitable scale for a drawing that fits inside a space 10 cm wide. (b) Make the scale drawing and use it to find the length of BC.
Reading a map, and why areas are different
Distances on a map behave exactly as you expect: multiply by the scale factor. Areas do not. An area is a length multiplied by a length, so both lengths get multiplied by the scale factor.
Why the factor is squared
In practice the safest route is to work out what 1 cm represents in a sensible unit first, then square that number to get what 1 cm² represents.
Example 4A map has a scale of 1 : 25 000. A forest covers 12 cm² on the map. Find the real area of the forest in km².
Plans and elevations
A solid is often described by three flat scale drawings, each one what you see looking straight at the solid from a particular direction. There is no perspective and no hidden depth — you draw exactly the outline you would see, plus any edge where the surface steps.
Plan
The view from directly above, looking straight down.
Front elevation
The view from the front, looking horizontally.
Side elevation
The view from the side, looking horizontally, at right angles to the front.
The three viewing directions
More worked examples
Example 5The solid below is a step: a cuboid 6 cm by 3 cm by 2 cm with a second cuboid 3 cm by 3 cm by 2 cm sitting on its left-hand half. Draw the plan, the front elevation and the side elevation seen from the right.
Example 6A model car is made to a scale of 1 : 24. The real car is 4.32 m long and its windscreen has an area of 1.44 m². Find (a) the length of the model in cm, (b) the area of the model windscreen in cm².
Example 7A map has a scale of 1 : 20 000. A rectangular field measures 5 cm by 3.5 cm on this map. (a) Find the real dimensions in metres. (b) Find the real area in km². (c) The same field is redrawn on a map of scale 1 : 50 000. Find its dimensions on the new map.
Your turn
Practice set
- A map has a scale of 1 : 200 000. Complete: 1 cm represents ___ km.
- On a 1 : 25 000 map two masts are 6.8 cm apart. Find the real distance in km.
- A road is 4.5 km long. How long is it on a 1 : 50 000 map?
- A model is built to a scale of 1 : 20. The real object is 3.6 m long and one face has area 2.4 m². Find the model's length in cm and that face's area in cm².
- A lake covers 8 cm² on a 1 : 50 000 map. Find its real area in km².
- A rectangular garden is 18 m by 12 m. (a) Choose a suitable scale so that the drawing fits inside a box 10 cm by 8 cm. (b) Give the dimensions of the drawing. (c) How long is the diagonal path on the drawing, and in real life?
- 200 000 cm = 2000 m → 2 km
- 1 cm represents 0.25 km, so 6.8 × 0.25 = 1.7 km
- 4.5 km = 450 000 cm; 450 000 ÷ 50 000 = 9 cm
- Length 3.6 m = 360 cm, 360 ÷ 20 = 18 cm. Area factor 20² = 400; 2.4 m² = 24 000 cm², 24 000 ÷ 400 = 60 cm²
- 1 cm → 0.5 km so 1 cm² → 0.5² = 0.25 km²; 8 × 0.25 = 2 km²
- (a) 18 ÷ 10 = 1.8, so round up to 1 cm to 2 m (that is 1 : 200); check the other side: 12 ÷ 2 = 6 ≤ 8 ✓ (b) 9 cm by 6 cm (c) diagonal = √(9² + 6²) = √117 = 10.8 cm, so real = 10.8 × 2 = 21.6 m
Key points to remember
- A scale is drawing : real with both sides in the same unit, written as 1 : n. A ratio scale never has units attached.
- To turn 1 : n into words, convert n centimetres: ÷100 gives metres, then ÷1000 gives kilometres.
- Drawing → real: multiply by n. Real → drawing: divide by n. Ask yourself whether the answer should be bigger or smaller before you calculate.
- Convert units before you multiply or divide, and never mix units inside one line of working.
- Areas scale by k², not by k (and volumes by k³). Squaring “what 1 cm represents” is the safest route.
- Remember the squared unit conversions too: 1 m² = 10 000 cm² and 1 km² = 1 000 000 m².
- Choose a scale by dividing the longest real length by the space available, then rounding up to a friendly number such as 1, 2, 5, 10, 20, 50 or 100.
- In a construction, work to ±2 mm and ±2°, label every point, and always write the scale on the drawing.
- The plan is the view from above, the front and side elevations are the horizontal views; draw internal lines wherever the solid steps.
Where next?
📚 Take the full lesson
Scale Drawings — objectives, a starter, worked examples, practice and an exit check, taught step by step.
✏️ Practise exam questions
Map Scales — 25 exam-style questions worth 100 marks, with full answers and the mark scheme.
Progress is saved on this device only and appears on the notes home page.