Skip to content
MathClicksIGCSE← All notes Cambridge IGCSE® Mathematics 0580 Extended Chapter 23 — Vectors and Transformations

23.2  Vectors

Column vectors and their arithmetic — adding, subtracting and scaling, magnitude by Pythagoras, and the difference between a vector and a coordinate.

What a vector actually is

A vector is a movement: how far, and in which direction. “4 km due north” is a vector. “3 squares right and 2 squares up” is a vector. The number 7 on its own is not — it has a size but no direction. In this chapter every translation, every journey around a shape and every exam proof is built out of these movements.

Key idea A vector has a magnitude (its length) and a direction. Two arrows drawn anywhere on the page represent the same vector if they have the same length and point the same way — where the arrow starts does not matter.

In IGCSE we write vectors as column vectors: two numbers stacked in brackets. We print them here using the same stacked style as a fraction, but read carefully — there is no divide bar in a column vector. The top number is the move across (positive = right), and the bottom number is the move up (positive = up):

a = (32)  means  3 right and 2 up   ·   (−4−1)  means  4 left and 1 down Top = across  ·  bottom = up  ·  minus reverses the direction
Watch out A coordinate and a column vector are different things. The coordinate (3, 2) is a place — one fixed point on the grid. The vector (32) is a journey — 3 right and 2 up from wherever you happen to be. Writing a coordinate where the question asks for a vector (or drawing the brackets side by side instead of stacked) loses the mark.

Equal vectors: the same movement, wherever it starts

Three copies of the same vector a 3 across 2 up a a a Same length, same direction → same vector

The three ways vectors are written

  • AB with a small arrow drawn on top, pointing from the A to the B — the vector that takes you from point A to point B. (We cannot print the arrow here, so read every AB in this chapter as “AB with an arrow over it”.)
  • A single bold letter, like a or b — this is how your exam paper prints them.
  • In handwriting you cannot write in bold, so underline it: a becomes “a” with a line underneath. Examiners look for this.

Describing a translation

When a shape slides (a translation), you describe the slide with a single column vector. A triangle moved 5 right and 3 down has been translated by (5−3).

Every point of the shape makes exactly the same journey — that is why one vector describes the whole movement.

Exam tip “Describe fully the single transformation” on Paper 4: if it is a translation, the word translation plus the column vector earns both marks. “Moved 5 right and 3 down” in words is not enough at Extended level.

Adding, subtracting and scaling vectors

Vector arithmetic is component-by-component: tops with tops, bottoms with bottoms. The picture that goes with addition is nose to tail: do the first journey, then start the second journey where the first one finished. The single arrow from the very start to the very end is the sum, often called the resultant.

(x₁y₁) + (x₂y₂) = (x₁+x₂y₁+y₂)   ·   k(xy) = (kxky) Add tops to tops and bottoms to bottoms · a scalar multiplies both

Adding: nose to tail

a + b a b start

(41) + (23) = (64)

Subtracting: add the reverse

a − b a −b start

(41) − (23) = (2−2)

Why “add the reverse” works Subtracting a journey is the same as making the opposite journey: a − b = a + (−b). The vector −b has the same length as b but points the opposite way — both numbers in the column change sign.
Example 1c = (−25) and d = (4−1). Find (a) c + d  (b) c − d.
1
(a) Add tops to tops and bottoms to bottoms. c + d = ( −2 + 4  over  5 + (−1) ) = ( 2 over 4 )
2
(b) Subtract component by component — and be careful with the double sign on the bottom. c − d = ( −2 − 4  over  5 − (−1) ) = ( −6 over 6 )
(a) (24)     (b) (−66)
Careful The bottom of (b) is 5 − (−1) = 6, not 4. Subtracting a negative is where most arithmetic marks disappear in this topic.

Multiplying by a scalar

A scalar is an ordinary number. Multiplying a vector by a scalar k multiplies both components by k: the arrow keeps its direction but is stretched k times as long. If k is negative, the arrow also flips to point the opposite way. Multiplying by 0 gives the zero vector (00) — no movement at all.

Example 2a = (31) and b = (−24). Find 2a − 3b.
1
Scale each vector first — multiply both components. 2a = ( 6 over 2 )
3b = ( −6 over 12 )
2
Now subtract, component by component. 2a − 3b = ( 6 − (−6)  over  2 − 12 ) = ( 12 over −10 )
2a − 3b = (12−10)
Exam tip Write the scaled vectors 2a and 3b down before combining. On Paper 2 the method mark is for exactly this line.

Vector playground

Set the components of a and b and the scalars p and q. The grid draws pa then qb nose to tail and highlights the resultant, with its magnitude worked out below. Try p = 2, q = −3 to picture Example 2.

O pa qb pa+qb

Scalar multiples make parallel vectors

Look at what scaling does on the grid: 2a is twice as long as a but points the same way; −a is the same length pointing backwards; ½a is half as long. Every one of them is parallel to a — and this single fact powers almost every vector proof in the next lesson.

Every scalar multiple of a is parallel to a

a 2a −a ½a All four arrows have the same gradient: parallel
Key idea b = ka (for some scalar k ≠ 0) means b is parallel to a — and the other way round: if two vectors are parallel, one must be a scalar multiple of the other. To prove two vectors are parallel, find the k and say so.
Example 3Show that p = (6−4) and q = (−96) are parallel.
1
Look for one scalar that turns p into q. Compare the tops: 6 × k = −9. k = −9 ÷ 6 = −3/2
2
Check the same scalar works on the bottoms. −3/2 × (−4) = 6  ✓
3
Write the conclusion the mark scheme wants: the multiple, then the word. q = −3/2 p, so q is a scalar multiple of p
q = −32p, so p and q are parallel
Why the minus is fine A negative k just means the arrows point opposite ways along the same direction — they are still parallel, like two lanes of one road.
Exam tip A quick parallel test for column vectors: is top × other bottom = bottom × other top? Here 6 × 6 = 36 and (−4) × (−9) = 36 — equal, so parallel. But in a “show that” question you must still write the scalar-multiple statement.

Magnitude: the length of a vector

The magnitude (or modulus) of a vector is the length of its arrow, written with vertical bars: |a| is the magnitude of a, and |AB| is the magnitude of AB. The components form the two short sides of a right-angled triangle and the arrow is the hypotenuse — so the length comes straight from Pythagoras.

|a| = x² + y²   for   a = (xy) Square each component, add, square root — Pythagoras

Why it is Pythagoras

4 across 3 up |a| = √(4²+3²) = 5 a = ( 4 over 3 )
Example 4Find (a) |u| where u = (6−8)  (b) |v| where v = (52), giving (b) exactly and to 3 significant figures.
1
(a) Square both components — the minus disappears when you square. |u| = √(6² + (−8)²) = √(36 + 64) = √100
2
100 is a perfect square, so the answer is exact and whole. |u| = 10
3
(b) Same recipe. |v| = √(5² + 2²) = √(25 + 4) = √29
4
29 is not a perfect square: leave √29 as the exact answer, then round. √29 = 5.3851… = 5.39 (3 s.f.)
(a) |u| = 10     (b) |v| = √29 ≈ 5.39
Watch out Magnitudes do not add. |a + b| is almost never |a| + |b| — two journeys nose to tail usually bend, so the direct distance is shorter than the two lengths added. Always find the resultant column vector first, then apply Pythagoras to that. (The only time they agree is when a and b point the same way.)
Exam tip If the question says “exact”, stop at the surd (√29). If it says nothing, give 3 significant figures — the standard 0580 accuracy rule. Writing √(5²+2²) earns the method mark even if you then slip on the calculator.

More worked examples

Example 5s = (23) and t = (k6) are parallel. Find the value of k.
1
Parallel means t = ms for some scalar m. Use the components you know — the bottoms. 6 = m × 3  →  m = 2
2
Apply the same scalar to the tops. k = m × 2 = 2 × 2 = 4
3
Check: (46) = 2(23) ✓
k = 4
Example 6a = (2−1) and b = (34). Work out |a + 2b|, giving your answer to 3 significant figures. (Paper 4 style)
1
Resultant first: scale b, then add. 2b = ( 6 over 8 )
a + 2b = ( 2 + 6  over  −1 + 8 ) = ( 8 over 7 )
2
Now — and only now — apply Pythagoras to the resultant. |a + 2b| = √(8² + 7²) = √(64 + 49) = √113
3
Round at the end. √113 = 10.630… = 10.6 (3 s.f.)
|a + 2b| = √113 ≈ 10.6
Exam trap Computing |a| + 2|b| instead gives √5 + 2 × 5 = 12.2… — a wrong answer that looks plausible and scores nothing. Magnitude is taken after combining, never before. Pythagoras, not addition.

Your turn

Practice set

  1. a = (25), b = (−31). Find a + b and a − b.
  2. c = (−13). Write down 4c and −2c.
  3. p = (3−2), q = (14). Find 2p + 3q.
  4. Find |v| for v = (−724), and |w| for w = (3−5) to 3 significant figures.
  5. u = (4−6) and v = (−10k) are parallel. Find k.

  1. 2 + (−3) = −1, 5 + 1 = 6 → (−1 over 6); and 2 − (−3) = 5, 5 − 1 = 4 → (5 over 4)
  2. Multiply both components: 4c = (−4 over 12) and −2c = (2 over −6)
  3. 2p = (6−4), 3q = (312), add → (9 over 8)
  4. |v| = √(49 + 576) = √625 = 25; |w| = √(9 + 25) = √34 = 5.83 (3 s.f.)
  5. −10 = m × 4 gives m = −5/2, so k = −5/2 × (−6) = k = 15

Key points to remember

  • A column vector is a movement: top = across, bottom = up. A coordinate is a place; a vector is a journey.
  • Vectors are printed as AB with an arrow on top, or bold a — in handwriting, underline your vector letters.
  • Add and subtract component by component; in a diagram, add nose to tail.
  • A scalar multiplies both components: ka is parallel to a, and b = ka is exactly what “parallel” means.
  • Magnitude is Pythagoras: |a| = √(x² + y²) — exact as a surd, or 3 s.f.
  • Never add magnitudes: find the resultant column vector first, then take |…| of that.
  • A translation is described fully by the word translation plus its column vector.

Where next?

✅ Mark scheme All notes

Progress is saved on this device only and appears on the notes home page.