Areas of Quadrilaterals
Learn areas of quadrilaterals step by step with worked examples you can follow. Then practise with 37 instant-feedback questions. Free Algebra 2 lesson from Mr Ahmed Hamouda.
Find the areas of parallelograms, trapezoids, rhombi, and kites — and work backwards from an area to a missing dimension.
Core Concepts
1. What "base" and "height" really mean
Every area formula on this page is really the same idea: how far across times how far up. The trap is that "how far up" is never a slanted side — it is always measured straight up, at a right angle to the base.
2. Where the parallelogram formula comes from
Cut a right triangle off one end of a parallelogram and slide it to the other end. Nothing is added and nothing is lost — you get a rectangle with the same base and the same height. A rectangle's area is bh, so the parallelogram's area must be bh too.
This postulate is what makes decomposition legal: chop a figure into pieces, add the pieces' areas, and you have the whole.
3. Where the trapezoid formula comes from
A trapezoid is a quadrilateral with exactly one pair of parallel sides; those parallel sides are the bases. Take a trapezoid, copy it, rotate the copy 180°, and fit the two together. The result is a parallelogram whose base is b1 + b2 and whose height is h. That parallelogram has area h(b1 + b2), and one trapezoid is exactly half of it.
A = h · (b1+b2)/2. The trapezoid behaves like a rectangle whose width is the average of the two bases.4. Rhombi and kites — use the diagonals
A rhombus is a parallelogram with all four sides congruent. A kite is a quadrilateral with exactly two pairs of consecutive congruent sides. In both figures the diagonals are perpendicular, so their areas are controlled by the diagonals rather than by a base and height.
d1 = 12 and d2 = 14. Double every half before you multiply. In a kite, only one diagonal is bisected.A rhombus is also a parallelogram, so A = bh still works on it — use whichever information you are actually given.
5. When the height is missing
a2 + b2 = c2, where the slant side is the hypotenuse.1 : √3, short leg opposite the 30°.h = (slant side) · sin(angle).A = bh. The h must be perpendicular to the b you chose.A = ½h(b1 + b2). Only the two parallel sides are bases.A = ½d1d2, using full diagonals.Key Figures
A = bh.b2 = 10, b1 = 6, h = 4, so A = ½(4)(6+10) = 32 square units.b1+b2 and height h, whose area is h(b1+b2). One trapezoid is half of that.A = ½d1d2.Move It Yourself
Worked Examples
A = 23 × 25 = 575 is the single most common error on this figure. The height is the dashed segment, and it lands outside the parallelogram on the extension of DC — that is perfectly legal.h = s · sinθ and A = b · s · sinθ. The special right triangles are just the shortcut cases θ = 30°, 45°, 60°.½(6)(7) = 21 — exactly one quarter of the truth. Doubling both halves multiplies the answer by 4.½d1d2 no matter where along d2 the crossing point sits — which is why the same formula covers both the rhombus and the kite.Try It Yourself
Practice 1
Practice 2
Practice 3
Practice 4
Practice 5
Practice 6 — challenge
Summary
| Situation | What to do | Result |
|---|---|---|
| Parallelogram, b and h given | Multiply directly | A = bh |
| Parallelogram, slant side + offset given | Pythagorean Theorem for h, then bh | e.g. 7-24-25 → A = 23(24) |
| Parallelogram, slant side + angle given | h = s · sinθ (or a special right triangle) | A = b · s · sinθ |
| Trapezoid, both bases + h | Average the bases, times the height | A = ½h(b1+b2) |
| Trapezoid, legs given but no h | Drop two altitudes; solve the corner right triangle | h = √(leg2 − x2) |
| Rhombus or kite, diagonals given | Half the product of the diagonals | A = ½d1d2 |
| Only half-diagonals marked | Double each half first | d = 2 · (half) |
| Area given, a length missing | Substitute into the formula, solve the equation | e.g. ½(22)x = 92 |
| Mixed units (cm and in.) | Convert lengths before substituting | 1 in. = 2.54 cm |
| Irregular figure | Decompose it; add the parts | Area Addition Postulate |
- Using a slant side as the height of a parallelogram or trapezoid.
- Using a leg of a trapezoid as a base — only the parallel sides are bases.
- Forgetting to double half-diagonals in a rhombus (this quarters the answer).
- Forgetting the ½ in the trapezoid, rhombus and kite formulas (this doubles the answer).
- Reporting the answer in linear units instead of square units.
- Rounding a bag/tile/sheet count down instead of up.
- Substituting a centimetre length into a square-inch equation without converting.
Practice Quiz
15 questions · click an answer to check it instantly