Areas of Regular Polygons

Algebra 2Module 11: MeasurementGeometry and Trigonometry

Learn areas of regular polygons step by step with worked examples you can follow. Then practise with 37 instant-feedback questions. Free Algebra 2 lesson from Mr Ahmed Hamouda.

Decompose a regular polygon into congruent triangles to find its area with A = ½aP, and add or subtract basic regions to find the area of a composite figure.

Core Concepts

1. The four words you need before any formula

Every regular polygon fits perfectly inside one circle — each vertex touches the circle. That circle is what gives the polygon a center, a radius and an apothem.

Center of a regular polygon — the center of the circle circumscribed about the polygon.
Radius of a regular polygon — the radius of the circumscribed circle: a segment from the center to a vertex.
Apothem — a perpendicular segment between the center of the polygon and a side of the polygon.
Central angle — an angle with its vertex at the center whose sides pass through two consecutive vertices.
Composite figure — a figure that can be separated into basic regions (triangles, rectangles, trapezoids, circles, regular polygons).
Decomposing into triangles — splitting an n-gon into n congruent isosceles triangles by drawing all n radii.
Watch Out! The radius goes to a corner; the apothem goes to the middle of a side. They are never the same length — the apothem is always shorter, because the perpendicular distance to a line is the shortest distance.

2. The central angle: 360/n

Drawing all n radii chops the full turn around the center into n equal pieces, and a full turn is 360°. So each slice gets the same share.

Central Angle of a Regular Polygon
The measure of each central angle of a regular n-gon is 360°/n.
Example: a regular octagon has 360°/8 = 45°; a regular pentagon has 360°/5 = 72°.
Study Tip: The apothem bisects the central angle (it is the altitude of an isosceles triangle drawn to the base). So the acute angle you actually use in trigonometry is 180°/n, not 360°/n.

3. Why the area formula works

Split the regular n-gon into n congruent isosceles triangles. Each triangle has base s (one side of the polygon) and height a (the apothem).

area of ONE triangle = ½bh = ½sa
area of ALL n triangles = n · ½sa = ½a(ns)
but ns = P, the perimeter  ∴  A = ½aP
Key Concept · Area of a Regular Polygon
The area A of a regular n-gon with side length s is one half the product of the apothem a and the perimeter P.
A = ½a(ns)   or   A = ½aP

4. Finding a missing apothem, radius or side

Drop the apothem to a side. You get a right triangle whose legs are a and s/2, whose hypotenuse is the radius r, and whose angle at the center is 180°/n.

tan(180°/n) = (s/2) / a  →  a = s / (2·tan(180°/n))
sin(180°/n) = (s/2) / r  →  r = s / (2·sin(180°/n))
cos(180°/n) = a / r  →  a = r·cos(180°/n)
Pythagorean check: r² = a² + (s/2)²
Find the central angle 360°/n, then halve it to get 180°/n.
Halve the side to get the leg s/2.
Use tangent (or a special right triangle) to get the apothem a.
Compute the perimeter P = ns.
Substitute into A = ½aP and round only at the end.
Study Tip: Two shortcuts worth memorising, both from 30-60-90 triangles:
equilateral triangle → A = (√3/4)s²  ·  regular hexagon → a = (√3/2)s, r = s, A = (3√3/2)s².

5. Composite figures

A composite figure is just several basic figures glued together. Break it apart, find each piece, then add (Area Addition Postulate) — or, when a piece has been cut out, find the big region and subtract the hole.

area of figure = area of piece₁ + area of piece₂ + …
area of figure = area of enclosing region − area of removed region
Study Tip · Drawing Figures: To solve area problems by subtracting, redraw the basic shapes that are being removed. Seeing the "hole" as its own triangle or rectangle makes the missing measures obvious.
1
Central angle of a regular n-gon = 360°/n. The apothem bisects it into two angles of 180°/n.
2
A = ½aP. Apothem × perimeter ÷ 2 — nothing else.
3
The apothem is perpendicular to a side and bisects it, so its foot is the midpoint of that side.
4
Radius > apothem, always. r² = a² + (s/2)².
5
Composite figure = add the parts, or subtract the hole. Never mix the two by accident.

Key Figures

Anatomy of a Regular Polygon
72° radius apothem F P A B C D E
Regular pentagon ABCDE inscribed in ⊙P. PA is a radius (center → vertex, length 110 units); PF is the apothem (center → midpoint of a side, length 89 units, meeting the side at 90°). ∠BPC is a central angle: 360°/5 = 72°.
Decomposing an Octagon into 8 Congruent Triangles
P 45° a r s
The 8 radii cut the octagon into 8 congruent isosceles triangles. One triangle has base s (a side), height a (the apothem, meeting the side at 90°), and apex angle 360°/8 = 45°. Its area is ½sa, so the octagon's area is 8·½sa = ½a(8s) = ½aP.
Central Angle = 360° / n
n = 3 → 360/3 = 120° n = 5 → 360/5 = 72° n = 8 → 360/8 = 45°
More sides → smaller central angle, but the n triangles are always congruent and always fill exactly 360° at the center.
The 30-60-90 Triangle Hidden in Every Hexagon
a = (√3/2)s s/2 r = s 30° P K M
The apothem splits the 60° central angle into two 30° angles, so △PMK is a 30-60-90 triangle with legs in ratio 1 : √3 and hypotenuse 2. Here s/2 = 50, a = 86.6 and r = 100 units — exactly 1 : √3 : 2. Notice r is visibly longer than a.

Move It Yourself

Worked Examples

In the figure, regular hexagon JKLMNP is inscribed in ⊙R. Identify the center, a radius, an apothem, and a central angle of the polygon. Then find the measure of a central angle.
60° R S J K L M N P
Radius RK reaches a vertex; apothem RS reaches the midpoint of KL at a right angle.
1center = point Rcenter of the circumscribed circle
2radius = RKcenter to a vertex
3apothem = RScenter ⊥ to side KL
4central angle = ∠KRLvertex at R, sides through consecutive vertices K, L
5a regular hexagon has n = 6 sidesdefinition of hexagon
6m∠KRL = 360°/6 = 60°central angle = 360°/n
center R; radius RK; apothem RS; central angle ∠KRL = 60°
Watch Out! ∠KRM is not a central angle — K and M are not consecutive vertices. It measures 2(60°) = 120°.
A regular octagon has a side length of 4 centimeters. Find the area it covers. Round to the nearest tenth.
22.5° a 2 cm B A C D AC = s = 4 cm
One of the eight congruent triangles. BD is both the apothem and the altitude, so it bisects ∠ABC and bisects AC.
1m∠ABC = 360°/8 = 45°Step 1: central angle
2m∠DBC = 45° ÷ 2 = 22.5°apothem bisects the central angle
3DC = 4 ÷ 2 = 2 cmapothem bisects AC
4tan 22.5° = 2 / aStep 2: tanθ = opp/adj
5a = 2 / tan 22.5° ≈ 4.828 cmsolve for a
6P = 8(4) = 32 cmperimeter = ns
7A = ½aP = ½(4.828)(32)Step 3: area of a regular polygon
8A ≈ 77.25multiply
A ≈ 77.3 square centimeters
Check · regular pentagon, s = 4 in: central angle = 360°/5 = 72°, half = 36°, half-side = 2, so a = 2/tan 36° ≈ 2.753, P = 20, and A = ½(2.753)(20) ≈ 27.5 in².
Watch Out! Use 22.5°, not 45°, in the tangent ratio — the right triangle sits on half the central angle. Also keep the unrounded apothem in your calculator; rounding to 4.8 too early gives 76.8 instead of 77.3.
Find the area of a composite figure made of a square (s = 9 cm), a regular hexagon (a = 4.5√3 cm, P = 54 cm), and a trapezoid (h = 19 cm, b₁ = 15 cm, b₂ = 9 cm).
1area of figure = square + hexagon + trapezoidStep 1: separate the figure
2A = s² = 9² = 81 cm²Step 2: area of a square
3A = ½aP = ½(4.5√3)(54) ≈ 210.4 cm²area of a regular polygon
4A = ½h(b₁ + b₂) = ½(19)(15 + 9) = 228 cm²area of a trapezoid
5A ≈ 81 + 210.4 + 228Step 3: Area Addition Postulate
A ≈ 519.4 square centimeters
Study Tip: 121.5√3 = 210.44… Keep the radical until the last line so the rounding error does not build up across three pieces.
Find the area of the composite figure. Round to the nearest tenth, if necessary.
5 m 2 m 5 m 6 m 6 m 1 m 8 m
Subtract the notched triangle (base 2 m, height √35 m) from the whole trapezoid (bases 12 m and 8 m, height √35 + 1 m).
11² + h² = 6² → h = √35Step 1: Pythagorean Thm; the altitude bisects the base
2A = ½bh = ½(2)(√35) = √35 m²Step 2: area of the triangle
3A = ½h(b₁+b₂) = ½(√35 + 1)(12 + 8)Step 3: area of the trapezoid
4A = 10√35 + 10 m²distribute
5figure = (10√35 + 10) − √35 = 9√35 + 10Step 4: subtract the removed region
69(5.9161) + 10 ≈ 63.24evaluate
A ≈ 63.2 square meters
Watch Out! The trapezoid's height is √35 + 1, not √35 — the notch stops 1 m above the bottom edge. Forgetting the extra metre loses 20 m².

Try It Yourself

Problem 1

Find the measure of a central angle of a regular 20-gon, and the acute angle used in the apothem right triangle.
1central angle = 360°/20 = 18°360°/n
2half = 18° ÷ 2 = 9°apothem bisects it
central angle 18°; right-triangle angle 9°

Problem 2

Find the area of a regular hexagon with a perimeter of 72 inches. Round to the nearest tenth.
1s = 72 ÷ 6 = 12 inP = ns
2a = (√3/2)(12) = 6√3 ≈ 10.392 inhexagon 30-60-90 shortcut
3A = ½(6√3)(72) = 216√3A = ½aP
A ≈ 374.1 square inches

Problem 3

A regular hendecagon (11-gon) has edges of 7.46 millimeters. Find its area to the nearest hundredth.
1180°/11 ≈ 16.3636°half the central angle
2a = 3.73 / tan 16.3636° ≈ 12.7036 mmtan = (s/2)/a
3P = 11(7.46) = 82.06 mmP = ns
4A = ½(12.7036)(82.06)A = ½aP
A ≈ 521.23 square millimeters

Problem 4

A regular octagon has an apothem of 14 inches. Find its area to the nearest tenth.
1tan 22.5° = (s/2) / 14half central angle = 22.5°
2s = 28 tan 22.5° ≈ 11.598 insolve for s
3P = 8(11.598) ≈ 92.784 inP = ns
4A = ½(14)(92.784)A = ½aP
A ≈ 649.5 square inches

Problem 5

A regular octagon is inscribed in a circle of diameter 16 feet. Find the area of the octagon to the nearest tenth.
1r = 16 ÷ 2 = 8 ftradius of the regular polygon
2a = 8 cos 22.5° ≈ 7.391 fta = r cos(180°/n)
3s = 2(8) sin 22.5° ≈ 6.123 fts = 2r sin(180°/n)
4A = ½(7.391)(8 · 6.123)A = ½aP
A ≈ 181.0 square feet
Check: the circumscribed circle has area π(8²) ≈ 201.1 ft². The octagon must be a little smaller — 181.0 < 201.1 ✓

Problem 6

A regular heptagon has sides of 6 millimeters. Find its area to the nearest tenth.
1180°/7 ≈ 25.7143°half the central angle
2a = 3 / tan 25.7143° ≈ 6.2296 mmtan = (s/2)/a
3A = ½(6.2296)(42)P = 7(6) = 42
A ≈ 130.8 square millimeters

Summary

If you are given…What to doResult
Only nDivide 360° by n; halve it for the right trianglecentral angle 360°/n, half-angle 180°/n
Apothem a and perimeter PSubstitute directlyA = ½aP
Side s and na = s / (2 tan(180°/n)), then P = nsA = ns² / (4 tan(180°/n))
Apothem a and ns = 2a tan(180°/n), then P = nsA = ½aP
Radius r and na = r cos(180°/n), s = 2r sin(180°/n)A = ½aP
Hexagon with side sUse the 30-60-90 shortcut a = (√3/2)sA = (3√3/2)s²
Equilateral triangle side sUse a = s/(2√3)A = (√3/4)s²
A composite figureSeparate into basic regionsadd the parts — or subtract the removed region
central ∠ = 360°/n A = ½aP A = ½a(ns) P = ns a = s/(2 tan(180°/n)) r = s/(2 sin(180°/n)) a = r cos(180°/n) r² = a² + (s/2)² A = (√3/4)s² A = (3√3/2)s²
Common mistakes to avoid
  • Using the full central angle 360°/n in the trig ratio instead of the half-angle 180°/n.
  • Using the whole side s as the opposite leg instead of s/2.
  • Substituting the side length for P in A = ½aP. P is the whole perimeter.
  • Confusing radius and apothem. a reaches the middle of a side; r reaches a vertex; r > a.
  • Assuming a = (√3/2)s for every polygon — that is a hexagon-only shortcut, so the statement is only sometimes true.
  • Rounding the apothem too early; carry full precision until the final line.
  • In a composite figure, adding a region that was actually cut out.

Practice Quiz

15 questions · click an answer to check it instantly

0/15

๐Ÿ“ Test your understanding