MathClicksIGCSE← All notesCambridge IGCSE® Mathematics 0580ExtendedChapter 15 — Scale Drawings, Bearings and Trigonometry
15.6 The Sine and Cosine Rules
Trigonometry without a right angle — when to reach for the sine rule, when for the cosine rule, and how to use each one for sides and for angles.
One labelling convention runs everything
SOHCAHTOA (15.3 and 15.4) needs a right angle. Most triangles in Paper 4 do not have one —
and that is where the sine rule and the cosine rule take over. Both rules work in
any triangle, right-angled or not, and both are printed in the List of formulas at the front
of your exam paper. What the formula list cannot do for you is the part this page teaches:
choosing the right rule and labelling the triangle so the formula fits.
Key idea
Capital letters A, B, C name the angles (the vertices). Lower-case
letters a, b, c name the sides, and each side takes the letter of the
angle it sits opposite: side a faces angle A,
side b faces angle B, side c
faces angle C. An angle and its opposite side make a matching pair
— the idea both rules are built on.
The standard labelling — each side faces its own angle
Colour tells the story: the orange angle A faces the
orange side a across the triangle, green faces green, purple faces purple.
Before you write a single formula, relabel the triangle in the question with this convention —
it takes ten seconds and prevents almost every sine-rule error.
Exam tip
The examiner's letters rarely cooperate — you will meet triangles PQR and LMN. The convention
still works: the side opposite angle P is p, and so on.
If the question uses no letters at all, add your own to your sketch. Mark schemes award method marks
for a correct substitution into the rule, and a clear labelling is your evidence.
The sine rule — built on matching pairs
In any triangle, every side divided by the sine of its opposite angle gives the same number.
That single fact is the sine rule:
asin A =
bsin B =
csin C
Sine rule — sides on top: use this way up to find a side
sin Aa =
sin Bb =
sin Cc
Same rule flipped — sines on top: use this way up to find an angle
Both versions say the same thing, so you only ever equate two of the three fractions.
Choose the orientation that puts your unknown on top — then one multiplication finishes
the job, with no rearranging to go wrong.
Key idea
The sine rule needs a complete matching pair: an angle and the side opposite it. If you
know a pair plus one more side or one more angle, the sine rule will hand you the missing partner.
No complete pair? Then the sine rule cannot start — that is the cosine rule's territory.
Watch out
The classic sine-rule error is pairing a side with an angle that is not opposite it. Writing
8 / sin 75° because 8 and 75° both appear in the question scores
nothing if the 8 cm side actually faces the 40° angle. Always trace across the triangle: side,
straight through the middle, to the angle facing it. This is exactly why you relabel first.
Example 1In triangle ABC, angle A = 40°, angle B = 75° and a = 8 cm. Find b.
1
Inventory first. You know the pair A = 40° with a = 8 — a complete matching pair — plus the angle B opposite the side you want. Sine rule, sides on top (the unknown is a side).
b / sin B = a / sin A
2
Substitute, keeping each side glued to its own angle.
b / sin 75° = 8 / sin 40°
3
The unknown is already on top, so multiply both sides by sin 75°.
b = 8 × sin 75° ÷ sin 40° b = 8 × 0.965926… ÷ 0.642788… = 12.0217…
b = 12.0 cm (3 s.f.)
Check The biggest angle must face the biggest side. B = 75° is the
largest angle here (C = 65°), and b = 12.0 cm is indeed the longest side so far — the
answer is plausible. A ten-second size check like this catches most substitution slips.
Example 2In triangle ABC, a = 7 cm, b = 6 cm and angle A = 52°. Find angle B.
1
You know the pair (A, a) and the side b opposite the wanted angle. Sine rule again — but the unknown is an angle, so flip it sines-up.
sin B / b = sin A / a sin B / 6 = sin 52° / 7
2
Multiply both sides by 6.
sin B = 6 × sin 52° ÷ 7 = 6 × 0.788011… ÷ 7 = 0.675438…
3
Undo the sine with sin−1.
B = sin⁻¹(0.675438…) = 42.4882…°
angle B = 42.5° (1 d.p.)
Watch out sin−1 only ever gives the acute answer, but
sin 42.5° = sin 137.5° — an obtuse angle has the same sine. Could
B be 137.5° here? No: 137.5° + 52° is already over 180°. Also, b < a forces
B < A. When the obtuse candidate does survive both tests, you have the ambiguous case
— see Example 6.
The cosine rule — when there is no pair
Two common situations give you no complete matching pair, so the sine rule cannot even
begin: two sides with the angle between them (SAS), and all three sides with no angles at all
(SSS). Both belong to the cosine rule — think of it as Pythagoras with a correction term for
the missing right angle:
a² = b² + c² − 2bc cos A
Cosine rule — two sides and the included angle give the third side
Notice the geography of the formula: b and c are the
two sides you know, A is the angle sandwiched between them, and
a is the side facing that angle. If A = 90° then
cos A = 0 and the correction term vanishes — you are left with
Pythagoras, exactly as you should be.
To find an angle from three sides, rearrange it:
cos A = b² + c² − a²2bc
Cosine rule rearranged — three sides give any angle
Why this works
On the top line, the side opposite the angle you want is the one being subtracted. If the
answer for cos A comes out negative, do not panic and do not “fix” the sign —
it simply means A is obtuse, and cos−1 of a negative number correctly returns an
angle between 90° and 180°. Unlike the sine rule, the cosine rule never has an ambiguous
case: each cosine value matches exactly one angle in a triangle.
SAS setup for Example 3 — the known angle is wedged between the known sides
The 68° is included — both known sides run out of it.
That is the SAS fingerprint. The unknown side sits opposite the known angle, so it takes the same
letter: this is the a in a² = b² + c² −
2bc cos A.
Example 3In the triangle above, b = 9 cm, c = 7 cm and angle A = 68°. Find a.
1
Two sides and the included angle, no matching pair anywhere → cosine rule.
a² = b² + c² − 2bc cos A
2
Substitute in one line — the safest habit is to type the whole right-hand side into the calculator in one go.
a² = 9² + 7² − 2 × 9 × 7 × cos 68° a² = 130 − 126 × 0.374607… = 130 − 47.2004… = 82.7996…
3
Square root — and do not forget this step in the exam rush.
a = √82.7996… = 9.09943…
a = 9.10 cm (3 s.f.)
Watch out The classic calculator disaster: working out
130 − 126 first and then multiplying by cos 68°, which gives
√(4 × 0.3746…) = 1.22 — obvious nonsense. BIDMAS does the multiplication
before the subtraction, and so must you. Sanity-check the size too: a faces a 68° angle,
so it should be a touch shorter than the 9 cm side facing the biggest angle.
Exam tip
Both rules are on the formula list, so no memory marks are at stake — every mark is for
selection and substitution. Write the rule out first, exactly as printed, then substitute
underneath it. If your arithmetic later slips, that substitution line still banks the method marks.
Which rule? Read what you know, not what you want
Students lose more marks choosing the wrong rule than misusing the right one. The decision is
purely about what the question gives you:
The decision in one picture
One more pattern worth knowing: after the cosine rule hands you a new side
or angle, you usually do have a matching pair — so multi-step questions often run
cosine rule first, sine rule second. And if two angles are given, the third is free from the
180° angle sum, which often completes a pair for you.
Triangle solver
Tell it what you know. It names the correct rule, shows the substitution line the mark scheme wants, and solves the triangle — try an impossible triangle like 12, 5, 6 and see why.
Bearings meet the cosine rule
Paper 4's favourite home for these rules is a bearings journey: a ship or aircraft travels
one leg, turns, travels another, and you must find the direct distance back — a triangle with
two known sides and, once you dig it out, a known included angle. The trigonometry is routine; the
work is finding that angle. From 15.2, remember that a bearing is measured clockwise from
north and written with three figures.
Finding the angle at the turning point
Draw a north line at every vertex of the journey, not just the start.
At the turning point, find the back-bearing of the leg you arrived along: add or
subtract 180°. (Arrived on 070°? The way back is 070° + 180° = 250°.)
The interior angle of the triangle at the turn is the difference between that
back-bearing and the new bearing.
With the included angle found, the direct distance is a straight cosine
rule, and any new bearing you are asked for usually comes from a sine-rule angle added to or
subtracted from a known bearing. Example 5 below runs the full journey.
Watch out
Never assume the turn angle is “the difference of the two bearings”
(130° − 070° = 60° in Example 5 — wrong). The interior angle sits between the
reversed first leg and the second leg. Draw the north lines and it falls out correctly every
time; skip the diagram and it is a coin toss.
Exam tip
Quote bearings as three figures (095.3°, not 95.3°), give lengths to 3 significant figures
and angles to 1 decimal place unless told otherwise, and carry unrounded values between steps
— the same discipline as the linked-triangle problems in 15.4.
More worked examples
Example 4A triangle has sides a = 10 cm, b = 7 cm and c = 5 cm. Find the largest angle.
1
Three sides, no angles → rearranged cosine rule. The largest angle faces the largest side, so the target is angle A, opposite the 10 cm side.
cos A = (b² + c² − a²) / 2bc
2
Substitute — the side opposite the wanted angle is the one being subtracted on top.
cos A = (7² + 5² − 10²) / (2 × 7 × 5) cos A = (49 + 25 − 100) / 70 = −26 / 70 = −0.371428…
3
The negative cosine is information, not an error: A is obtuse. Take cos−1 of the value with its sign.
A = cos⁻¹(−0.371428…) = 111.804…°
largest angle = 111.8° (1 d.p.)
Check An answer over 90° makes sense: 7² + 5² = 74 is less
than 10² = 100, so the triangle is “more open” than right-angled at A. If you had
dropped the minus sign you would get 68.2° — and then the largest angle of the triangle
would not even be the one facing the largest side.
Example 5A ship sails from P for 12 km on a bearing of 070° to Q, then for 9 km on a bearing of 130° to R. Find (a) the distance PR, (b) the bearing of R from P.
1
North lines at P and Q. At Q, the back-bearing to P is 070° + 180° = 250°, and the new leg leaves on 130°. The interior angle at Q is the difference.
angle PQR = 250° − 130° = 120°
2
(a) Two sides (12, 9) with the included angle (120°) → cosine rule. Note cos 120° = −0.5 exactly, so subtracting the term adds.
PR² = 12² + 9² − 2 × 12 × 9 × cos 120° PR² = 225 − 216 × (−0.5) = 225 + 108 = 333 PR = √333 = 18.2483…
3
(b) The bearing of R from P is 070° plus the angle QPR inside the triangle. Now a matching pair exists (120° opposite PR), so the sine rule takes over — with the unrounded PR.
sin QPR / 9 = sin 120° / 18.2483… sin QPR = 9 × 0.866025… ÷ 18.2483… = 0.427121… angle QPR = sin⁻¹(0.427121…) = 25.2847…°
4
Add it to the first bearing and quote three figures.
bearing of R from P = 070° + 25.2847…° = 095.2847…°
(a) PR = 18.2 km (b) bearing 095.3°
Exam tip This cosine-rule-then-sine-rule chain is the single most common
Paper 4 structure for this topic. Bank the pattern: cosine rule creates the pair, sine rule uses
it, and the unrounded value travels between them in the calculator memory.
Example 6In triangle ABC, angle A = 35°, a = BC = 6 cm and c = AB = 9 cm. Amir calculates angle C = 59.4° and loses a mark — the diagram shows C is obtuse. What happened?
1
Amir's sine rule work is fine as far as it goes.
sin C / 9 = sin 35° / 6 sin C = 9 × 0.573576… ÷ 6 = 0.860364… C = sin⁻¹(0.860364…) = 59.356…°
2
But sine cannot tell an angle from its supplement: sin 59.4° = sin 120.6°. There is a second candidate.
C = 180° − 59.356…° = 120.643…°
3
Test whether the obtuse candidate survives the angle sum.
35° + 120.643…° = 155.6° < 180° — it fits
4
Both triangles genuinely exist — this is the ambiguous case, and it can happen whenever the side opposite the known angle is the shorter one (here 6 < 9). Only the diagram can decide, and the diagram shows C obtuse.
C = 120.643…° → 120.6°
angle C = 120.6° (1 d.p.) — the obtuse solution
Watch out Whenever the sine rule gives you an angle, spend five seconds on
the supplement check: compute 180° − your answer, add it to the known angle, and see
whether it still fits under 180°. If it fits, look at the diagram (or the phrase
“obtuse” in the question) before committing. The cosine rule never needs this check
— one more reason to prefer it when you have the choice.
Your turn
Practice set
In triangle ABC, angle A = 63°, angle B = 49° and a = 12 cm. Find b.
In triangle ABC, a = 11 cm, c = 8 cm and angle A = 74°. Find angle C.
In triangle ABC, b = 6 cm, c = 10 cm and angle A = 51°. Find a.
A triangle has sides 5 cm, 7 cm and 9 cm. Find its largest angle.
A yacht sails 15 km from P on a bearing of 040° to Q, then 11 km on a bearing of 105° to R. Find the distance PR.
Pair (A, a) known, want a side → sine rule sides-up. b = 12 × sin 49° ÷ sin 63° = 10.1644… → 10.2 cm
Pair (A, a) known, want an angle → sines-up. sin C = 8 × sin 74° ÷ 11 = 0.699099…, C = 44.354…° → 44.4° (obtuse candidate 135.6° fails: 135.6 + 74 > 180)
SAS → cosine rule. a² = 36 + 100 − 120 cos 51° = 136 − 75.5184… = 60.4815…, a = 7.7770… → 7.78 cm
Largest angle faces the 9 cm side. cos θ = (25 + 49 − 81) ÷ 70 = −0.1, θ = cos⁻¹(−0.1) = 95.739…° → 95.7°
Back-bearing at Q = 220°, so angle PQR = 220° − 105° = 115°. PR² = 225 + 121 − 330 cos 115° = 346 + 139.464… = 485.464…, PR = 22.033… → 22.0 km
Key points to remember
Label first: side a faces angle A. An angle plus its opposite side is a
matching pair — the sine rule cannot start without one.
Sine rule: a/sin A = b/sin B. Sides on top to find a side,
sines on top to find an angle — put the unknown upstairs.
Cosine rule: a² = b² + c² − 2bc cos A for
two sides + included angle; flipped to cos A = (b²+c²−a²)/2bc
for three sides.
Type the cosine rule in one line — BIDMAS multiplies 2bc cos A before subtracting.
A negative cosine just means an obtuse angle: keep the sign.
After a sine-rule angle, run the supplement check: if 180° − the answer also
fits the angle sum, the question is ambiguous — let the diagram decide.
Bearings journeys: north line at every vertex, back-bearing (±180°) at the
turn, difference gives the included angle — then cosine rule, then sine rule.
Both rules are given in the List of formulas; the marks are for choosing, substituting
clearly, and rounding once at the end (lengths 3 s.f., angles 1 d.p.).