Skip to content
MathClicksIGCSE← All notes Cambridge IGCSE® Mathematics 0580 Extended Chapter 15 — Scale Drawings, Bearings and Trigonometry

15.7  The Area of a Triangle

Area = ½ab sin C — the formula that needs no height, where it comes from, and how it teams up with the sine and cosine rules in segment and combined-shape problems.

Half base times height, without the height

You have used Area = ½ × base × height since primary school — but it needs a height drawn at right angles to the base, and non-right-angled exam triangles almost never hand you one. What they do hand you, after 15.6, is two sides and the angle between them. That is all this formula needs:

Area = ½ ab sin C Area of any triangle — two sides and the included angle (given in the List of formulas)
Key idea Here a and b are two sides and C is the angle sandwiched between them (the included angle) — the same labelling as 15.6, where side c would sit opposite angle C. Any pair of sides works, provided the angle you multiply by is the one they enclose: ½ab sin C = ½bc sin A = ½ac sin B.

Where it comes from — the hidden height

C C B A a b h = b sin C

Drop a perpendicular from A onto the base a. In the right-angled triangle on the left, that height is opposite the angle C and b is the hypotenuse, so 15.3 gives h = b sin C. Substitute into the old formula:

Area = ½ × a × h = ½ × a × b sin C

So this is not a new formula at all — it is ½ × base × height with the trigonometry doing the height measurement for you.

Why obtuse angles are no problem If C is obtuse, the perpendicular from A lands outside the base and the little right-angled triangle uses 180° − C — but sin(180° − C) = sin C, so the formula is unchanged. Sine is positive for every angle a triangle can hold, which is why ½ab sin C never goes negative. Try an angle like 150° in the explorer below and watch the height land outside the triangle.
Example 1Find the area of a triangle with sides 8.4 cm and 7.2 cm meeting at an angle of 62°.
1
Check the setup: the 62° is between the two given sides, so the formula applies directly. Area = ½ ab sin C = ½ × 8.4 × 7.2 × sin 62°
2
One line on the calculator — no rearranging, no intermediate rounding. Area = 30.24 × 0.882948… = 26.7003…
Area = 26.7 cm² (3 s.f.)
Watch out Area units are squared units: cm² here, not cm. Writing 26.7 cm is a lost mark on an otherwise perfect answer. And your calculator must be in degrees — a radian-mode slip gives −11.1, and a negative area should set off every alarm you have.

Triangle-area explorer

Fix two sides, then drag the included angle from 5° to 175°. Watch the triangle redraw to scale — and watch where the area peaks.

Included angle C60°
Exam tip The maximum area for two fixed sides comes at C = 90°, where sin C = 1 and the formula collapses to ½ab. Paper 4 occasionally asks exactly this — “find the angle that makes the area greatest” — and the one-line answer is 90°, because sine peaks there. Notice too that 40° and 140° give the same area: supplementary angles, equal sines.

Running the formula backwards

Examiners love reversing this formula: they give the area and ask for a missing angle or side. The algebra is one rearrangement each way:

sin C = 2 × Areaab      a = 2 × Areab sin C Backwards for an angle — and backwards for a side
Watch out — two angles share every sine When you solve sin C = 0.7142…, your calculator returns the acute answer only. But 180° − C has the same sine, so a given area usually comes from two possible triangles: one with an acute included angle, one obtuse. This is the same ambiguity as the sine rule in 15.6. Unless the question says the angle is acute, shows a diagram, or the obtuse candidate is geometrically impossible, give both.
Example 2A triangle has sides of 8 cm and 7 cm enclosing an angle θ, and an area of 20 cm². Find the two possible values of θ.
1
Substitute everything you know into the area formula. 20 = ½ × 8 × 7 × sin θ = 28 sin θ
2
Rearrange for sin θ. sin θ = 20 ÷ 28 = 0.714285…
3
The calculator gives the acute solution. θ = sin⁻¹(0.714285…) = 45.584…°
4
Subtract from 180° for the obtuse partner — a thinner, wider triangle with exactly the same area. θ = 180° − 45.584…° = 134.415…°
θ = 45.6° or θ = 134.4° (1 d.p.)
Check 28 × sin 134.4° = 28 × 0.7146… ≈ 20 ✓ — both angles really do return the given area. A quick substitution check like this is worth the ten seconds whenever you reverse a formula.
Exam tip Sanity-check the reverse problem before solving: the largest area two sides of 8 and 7 can make is ½ × 8 × 7 = 28 cm². If a question ever led you to sin θ > 1, the requested area is impossible — re-read the question, because you have mis-copied something.

Team-ups: quadrilaterals, polygons and the 15.6 rules

On Paper 4 this formula rarely works alone. The standard pattern: a shape with no right angles is split into triangles, the sine and cosine rules find any missing sides or angles, and ½ab sin C finishes each piece. Your job is to choose the split and keep the bookkeeping tidy.

The strategy for any straight-sided shape

  1. Cut along a diagonal so every piece is a triangle.
  2. For each triangle, hunt for the two-sides-and-included-angle combination. If a side or angle is missing, fetch it with the cosine rule or sine rule from 15.6 first.
  3. Carry shared diagonals unrounded between triangles, exactly as in 15.4.
  4. Add the pieces — and quote squared units.
Key idea — the sandwich test Before you multiply, ask: do my two sides sandwich my angle? The angle must sit at the vertex where the two sides meet. If it does not — say you know two sides and an angle at the far end — do not force the formula. Find an angle that is included (angle sum, sine rule) or a side that completes a sandwich, and only then compute the area.

Regular polygons: triangulate from the centre

O 60° R R

Joining the centre of a regular polygon to its vertices makes n identical triangles, each with two sides R and centre angle 360°/n. So a regular hexagon with R = 5 cm has area 6 × ½ × 5² × sin 60° = 64.9519… ≈ 65.0 cm². The same idea, one triangle at a time, measures any polygon — regular or not.

Example 3 below runs the full quadrilateral routine — cosine rule for the diagonal, sine rule for a missing side, two applications of the area formula — and Example 5 shows the three-sides version: cosine rule for an angle, then straight into ½ab sin C.

Segments: sector minus triangle

From 3.5 you know a sector is the pizza-slice between two radii, with area θ/360 × πr². Slice off the triangle between the two radii and what remains — the region between the chord and the arc — is a segment. No single formula is needed, because you already own both parts:

segment = θ360 × πr²  −  ½ r² sin θ Segment area = sector − triangle (both use the same angle θ at the centre)

One angle, three regions

O 100° r r segment triangle (isosceles)

The triangle is always isosceles — two of its sides are radii — so its area is ½ × r × r × sin θ with θ the centre angle: the sandwich test passes automatically. For a major segment (θ > 180° of arc), work with the minor one and subtract from the full circle instead.

Watch out Both terms must use the same angle and the same radius. The commonest slips are using the chord length instead of r in the triangle term, and rounding the sector and triangle separately before subtracting — keep both unrounded, subtract, then round once. If an answer is wanted “in terms of π”, only the sector term keeps its π; the triangle term is a plain number.

More worked examples

Example 3In quadrilateral ABCD, AB = 6 cm, BC = 8 cm and angle ABC = 105°. On the other side of the diagonal AC, angle CAD = 40° and angle ACD = 65°. Find the area of ABCD.
105° 40° 65° A B C D 6 cm 8 cm AC
1
Triangle ABC is ready-made: two sides sandwich the 105°. Compute its area directly — sin 105° is fine, obtuse angles included. area ABC = ½ × 6 × 8 × sin 105° = 24 × 0.965926… = 23.1822…
2
Triangle ACD needs the diagonal. Cosine rule in ABC (two sides + included angle): AC² = 6² + 8² − 2 × 6 × 8 × cos 105°
AC² = 100 − 96 × (−0.258819…) = 124.8466…
AC = 11.1734… (store it — unrounded)
3
In triangle ACD the third angle comes free, then the sine rule fetches AD (pair: 75° opposite AC). angle ADC = 180° − 40° − 65° = 75°
AD = AC × sin 65° ÷ sin 75° = 11.1734… × 0.906308… ÷ 0.965926… = 10.4838…
4
Now AC and AD sandwich the 40° at A — the sandwich test passes. area ACD = ½ × 11.1734… × 10.4838… × sin 40° = 37.6484…
5
Add the two triangles, then round once. area ABCD = 23.1822… + 37.6484… = 60.8306…
area of ABCD = 60.8 cm² (3 s.f.)
Exam tip This one question used the area formula, the cosine rule and the sine rule — the complete 15.6–15.7 toolkit. That is normal for a 6-mark Paper 4 part. Set out each triangle's working under its own heading and the method marks look after themselves.
Example 4A chord of a circle of radius 9 cm subtends an angle of 100° at the centre. Find the area of the minor segment, giving an exact expression and then the answer correct to 3 significant figures.
1
Sector first (3.5): fraction of the circle times πr². Keep it exact. sector = 100/360 × π × 9² = 45π/2 = 70.6858…
2
Triangle between the radii: isosceles, sides r and r around the 100°. triangle = ½ × 9 × 9 × sin 100° = 40.5 sin 100° = 39.8847…
3
Segment = sector − triangle. The exact form keeps π in the sector term only. segment = 45π/2 − 40.5 sin 100°
= 70.6858… − 39.8847… = 30.8011…
segment = 45π/2 − 40.5 sin 100° = 30.8 cm² (3 s.f.)
Check A 100° segment should be a fair bit smaller than its sector but not tiny — 30.8 against 70.7 is plausible. If your “segment” comes out bigger than the sector, you added instead of subtracting.
Example 5A triangular field has sides 8 m, 11 m and 15 m. Find its area.
1
Three sides, no angles: the area formula cannot start — nothing is sandwiched. Fetch an angle with the rearranged cosine rule (15.6). Any angle works; take C, opposite the 15 m side. cos C = (8² + 11² − 15²) ÷ (2 × 8 × 11)
cos C = (64 + 121 − 225) ÷ 176 = −40/176 = −0.227272…
2
The negative cosine says C is obtuse — keep the sign. C = cos⁻¹(−0.227272…) = 103.136…°
3
C is included between the 8 m and 11 m sides (it sits opposite the 15 m side), so the sandwich test passes. Use the unrounded angle. Area = ½ × 8 × 11 × sin 103.136…°
= 44 × 0.973830… = 42.8485…
Area = 42.8 m² (3 s.f.)
Watch out The angle you find and the sides you multiply must agree: having found the angle opposite 15, you multiply the other two sides, 8 and 11. Multiplying 8 and 15 with this angle is the classic mis-sandwich — it fails the test because the 103.1° does not sit between them.

Your turn

Practice set

  1. Find the area of a triangle with sides 9 cm and 12 cm enclosing an angle of 58°.
  2. A triangle with sides 10 cm and 9 cm around an included acute angle C has area 30 cm². Find C.
  3. A parallelogram has sides 8 cm and 5 cm and an interior angle of 74°. Find its area. (Hint: a diagonal splits it into two congruent triangles.)
  4. Find the exact area of an equilateral triangle of side 6 cm.
  5. A chord subtends 120° at the centre of a circle of radius 6 cm. Find the area of the minor segment.

  1. ½ × 9 × 12 × sin 58° = 54 × 0.848048… = 45.794… → 45.8 cm²
  2. sin C = 2 × 30 ÷ (10 × 9) = 0.666666…, C = sin⁻¹(0.6̅) = 41.810…° → C = 41.8° (the obtuse partner 138.2° is rejected — the question says acute)
  3. Each triangle: ½ × 8 × 5 × sin 74°; doubling gives 8 × 5 × sin 74° = 40 × 0.961262… = 38.450… → 38.5 cm²
  4. ½ × 6 × 6 × sin 60° = 18 × (√3/2) → 9√3 cm² (≈ 15.6 cm² — but leave the surd: “exact” was asked)
  5. Sector = 120/360 × π × 36 = 12π = 37.699…; triangle = ½ × 36 × sin 120° = 15.588…; subtract unrounded: 37.699… − 15.588… = 22.110… → 22.1 cm²

Key points to remember

  • Area = ½ab sin C works in any triangle — it is ½ × base × height with h = b sin C built in. It is given in the List of formulas.
  • The sandwich test: the two sides you multiply must enclose the angle you use. If they do not, fetch an included angle (angle sum, sine rule) or the right side first.
  • Obtuse included angles are fine — sin(180° − C) = sin C — and the area is greatest at C = 90°, where it equals ½ab.
  • Backwards: sin C = 2 × Area ÷ ab gives two candidate angles, acute and obtuse — state both unless the question rules one out.
  • Complicated shapes: split into triangles, use the cosine and sine rules (15.6) for missing pieces, carry diagonals unrounded, add the areas.
  • Segment = sector − triangle: θ/360 × πr² − ½r² sin θ, same angle and radius in both terms, rounded once at the end.
  • Answers in squared units, to 3 significant figures — unless the question says “exact” or “in terms of π”, in which case surds and π stay.

Where next?

✅ Mark scheme All notes

Progress is saved on this device only and appears on the notes home page.