Skip to content
MathClicksIGCSE← All notes Cambridge IGCSE® Mathematics 0580 Extended Chapter 7 — Perimeter, Area and Volume

7.2  Three-Dimensional Objects

Naming solids and their faces, edges and vertices, drawing them on isometric paper, and unfolding them into nets you can recognise in both directions.

Naming the solids

A solid is a three-dimensional object — it has length, width and height. The exam expects you to use the correct names without a picture to help you, so learn this vocabulary the way you learned the number sets:

SolidWhat it isEveryday example
CubeSix identical square facesa die
CuboidSix rectangular faces (a “box” shape)a cereal box
PrismThe same cross-section all the way along its lengtha bar of chocolate with a triangular cross-section
CylinderA circular prism: two circular ends joined by one curved surfacea tin of beans
PyramidA polygon base with triangular faces meeting at one point (the apex)the pyramids of Giza (square-based)
ConeA circular base and a curved surface rising to an apexan ice-cream cone
SphereOne curved surface; every point the same distance from the centrea football
HemisphereHalf a sphere: one flat circular face and one curved surfacea dome
FrustumA cone or pyramid with its top sliced off parallel to the basea plant pot or a lampshade
Key idea A prism is any solid with a uniform cross-section: wherever you slice it parallel to its ends, you see exactly the same shape. Cubes, cuboids and cylinders are all prisms. Pyramids, cones and spheres are not — their cross-sections change size as you move through the solid.
Watch out “Face” and “surface” are not quite the same word. A face is flat; a curved boundary like the side of a cylinder is a curved surface. If a question asks for the number of flat faces of a cylinder, the answer is 2, not 3.

Faces, edges and vertices

Three counting words describe how a solid is put together:

Face, edge and vertex on a cuboid

face edge vertex 6 faces, 12 edges, 8 vertices
SolidFaces (F)Edges (E)Vertices (V)
Cube6128
Cuboid6128
Triangular prism596
Hexagonal prism81812
Square-based pyramid585
Triangular-based pyramid (tetrahedron)464
Cylinder2 flat + 1 curved surface2 (curved)0
Cone1 flat + 1 curved surface1 (curved)1 (the apex)
Sphere1 curved surface00
Why this works — Euler’s check For every solid with only flat faces (a polyhedron), the counts always satisfy F + V − E = 2. Use it to check your counting: a cube gives 6 + 8 − 12 = 2 ✓. It does not apply to cylinders, cones or spheres, because they have curved surfaces.
Example 1A prism has a regular hexagon as its cross-section. Write down its number of faces, edges and vertices, and use Euler’s relationship to check your answer.
1
Faces: the two hexagonal ends, plus one rectangle for each of the six sides of the hexagon. F = 2 + 6 = 8
2
Vertices: each hexagonal end has 6 corners. V = 6 + 6 = 12
3
Edges: 6 around each end, plus 6 joining the two ends. E = 6 + 6 + 6 = 18
4
Check with Euler: F + V − E should equal 2. 8 + 12 − 18 = 2  ✓
F = 8,  E = 18,  V = 12
Exam tip For any prism whose cross-section has n sides: F = n + 2, E = 3n, V = 2n. Spotting the pattern is faster than counting from a sketch.

Solid inspector

Choose a solid to see its sketch, its net, its face–edge–vertex counts and whether it is a prism.

Nets: unfolding a solid flat

A net is what you get when you cut a hollow solid along some of its edges and unfold it flat in one connected piece. Fold the net back up and you rebuild the solid. Exam questions run in both directions: “draw a net of this cuboid” and “which of these nets folds into a cube?”

Nets you should recognise

  • Cube: six squares — there are exactly 11 different arrangements that work.
  • Cuboid: six rectangles in three matching pairs.
  • Cylinder: a rectangle (the curved surface unrolled) plus two circles.
  • Square-based pyramid: a square with a triangle on each side.
  • Triangular prism: three rectangles in a row with a triangle at each end.

Spotting a fake cube net

  • It must have exactly 6 squares — count them first.
  • A 2 × 2 block anywhere means it cannot fold: two squares would land on the same face.
  • A straight strip of 5 or more fails: four squares wrap right around the cube, so the fifth overlaps the first.
  • Fold it in your head, face by face — or track the opposite-face pairs.

Which of these fold into a cube?

A ✓ B ✓ C ✗ D ✗
Example 2Using the diagram above, explain which of the nets A–D fold into a cube.
1
A is the classic cross: a column of four squares wraps around the cube, and the two side squares fold in to become the remaining pair of opposite faces. A folds  ✓
2
B is a “1–4–1” arrangement: a row of four with one flap above and one below. Every 1–4–1 arrangement folds, wherever the flaps sit along the row. B folds  ✓
3
C contains a 2 × 2 block. Folding any 2 × 2 block forces two squares onto the same face of the cube, so one face is doubled and another is missing. C does not fold  ✗
4
D has a straight strip of five. Four squares in a strip wrap completely around the cube, so the fifth lands exactly on top of the first. D does not fold  ✗
A and B fold into a cube; C and D do not
Exam tip When a question marks a face on a net and asks which face ends up opposite it: in any straight line of squares, faces separated by exactly one square become opposite faces. Neighbouring squares in the net always share an edge in the cube, so they can never be opposite.

Sketching solids and isometric drawing

You need to draw solids two ways. A sketch shows the solid in perspective-style, with hidden edges dashed. An isometric drawing is made on a triangular dot grid and keeps every length to scale, which is why exam questions about building cuboids from centimetre cubes use it.

A 2 × 1 × 1 cuboid on isometric dots

2 units 1 unit 1 unit vertical edges stay vertical; the other edges follow the dots

The metric units toolkit

Mensuration questions constantly switch units mid-problem, so keep the whole metric system in one place in your head. Converting to a larger unit divides; converting to a smaller unit multiplies.

QuantityUnitsConversions
Lengthmm, cm, m, km1 cm = 10 mm, 1 m = 100 cm, 1 km = 1000 m
Massg, kg1 kg = 1000 g
Capacityml, l1 l = 1000 ml
Areamm², cm², m², km²1 cm² = 100 mm², 1 m² = 10 000 cm², 1 km² = 1 000 000 m²
Volumemm³, cm³, m³1 cm³ = 1000 mm³, 1 m³ = 1 000 000 cm³
1 ml = 1 cm³   ·   1 l = 1000 cm³   ·   1 m³ = 1000 l The link between volume and capacity
Watch out Area and volume conversions use the length factor squared and cubed. Because 1 m = 100 cm, you get 1 m² = 100² = 10 000 cm² and 1 m³ = 100³ = 1 000 000 cm³. Writing 1 m³ = 100 cm³ is the error examiners see most.
Exam tip In a practical question — water in a tank, sand in a pit — convert every length to the same unit before calculating, then convert the final answer to the unit the question asks for. State the conversion line explicitly: it is usually worth a mark.

More worked examples

Example 3Name each solid. (a) Every cross-section parallel to the ends is the same triangle. (b) Every cross-section parallel to the base is a circle, shrinking steadily to a point at the top. (c) Every cross-section through the solid is a circle, largest through the centre.
1
(a) A constant cross-section means a prism; the cross-section is a triangle. triangular prism
2
(b) Circular cross-sections that shrink to an apex describe a cone — the cross-section changes size, so it is not a prism. cone
3
(c) Only one solid gives a circle in every direction of slicing. sphere
(a) triangular prism   (b) cone   (c) sphere
Example 4A cube net is a vertical column of four squares labelled A, B, C, D from top to bottom, with square E attached to the left of B and square F to its right. When the net is folded, which face is opposite (a) B, (b) E?
1
In a straight line of squares, faces separated by exactly one square end up opposite. In the column A, B, C, D: A is opposite C,  B is opposite D
2
(a) So the face opposite B is D. B ↔ D
3
(b) E and F sit either side of the same square, so when folded they wrap around to opposite sides of the cube. E ↔ F
(a) D    (b) F
Exam trap Two squares that touch in the net can never be opposite faces — they share an edge on the cube. If your answer pairs touching squares, fold again.
Example 5Convert: (a) 2.4 m to cm  (b) 3500 g to kg  (c) 0.75 l to ml  (d) 4.2 m² to cm²  (e) 2 500 000 cm³ to m³.
1
(a) and (b) and (c) are single-factor conversions: multiply going to the smaller unit, divide going to the larger. 2.4 × 100 = 240 cm
3500 ÷ 1000 = 3.5 kg
0.75 × 1000 = 750 ml
2
(d) Area needs the squared factor 100² = 10 000. 4.2 × 10 000 = 42 000 cm²
3
(e) Volume needs the cubed factor 100³ = 1 000 000, and we are going to the larger unit, so divide. 2 500 000 ÷ 1 000 000 = 2.5 m³
(a) 240 cm  (b) 3.5 kg  (c) 750 ml  (d) 42 000 cm²  (e) 2.5 m³

Your turn

Practice set

  1. Write down the number of faces, edges and vertices of a cuboid, and verify Euler’s relationship F + V − E = 2.
  2. A prism has a right-angled triangle as its cross-section. Name the solid and state its values of F, E and V.
  3. Which of these solids is not a prism: cuboid, cylinder, cone, hexagonal prism? Explain how you know.
  4. A cube net is a row of four squares numbered 1, 2, 3, 4, with square 5 above square 2 and square 6 above square 3. Which face is opposite face 1?
  5. Convert: (a) 3.4 m to cm  (b) 2500 ml to litres  (c) 0.7 kg to g  (d) 5 m² to cm²  (e) 2 000 000 cm³ to m³.

  1. F = 6, E = 12, V = 8; check: 6 + 8 − 12 = 2 ✓
  2. A triangular prism — the right angle changes nothing about the counts: F = 5, E = 9, V = 6
  3. The cone: its circular cross-sections shrink towards the apex, so the cross-section is not the same all the way through. The other three all have uniform cross-sections.
  4. In the row 1, 2, 3, 4, faces separated by one square are opposite, so 1 is opposite 3 (2 is opposite 4, and 5 is opposite 6).
  5. (a) 340 cm (b) 2.5 l (c) 700 g (d) 5 × 10 000 = 50 000 cm² (e) 2 000 000 ÷ 1 000 000 = 2 m³

Key points to remember

  • A prism has the same cross-section all along its length — cubes, cuboids and cylinders are prisms; pyramids, cones and spheres are not.
  • A face is flat, an edge is where two surfaces meet, a vertex is a corner. The curved side of a cylinder is a surface, not a face.
  • For any polyhedron, F + V − E = 2 — use it to check your counts (it does not apply to curved solids).
  • A cube net must have 6 squares, no 2 × 2 block and no strip of 5; in a straight line of squares, faces separated by one square fold to opposite faces.
  • On isometric paper, vertical edges stay vertical and every length is drawn to scale along the dots; hidden edges in sketches are dashed.
  • Area converts with the squared factor and volume with the cubed factor: 1 m² = 10 000 cm², 1 m³ = 1 000 000 cm³, and 1 l = 1000 cm³.

Where next?

✅ Mark scheme All notes

Progress is saved on this device only and appears on the notes home page.