Skip to content
MathClicksIGCSE← All notes Cambridge IGCSE® Mathematics 0580 Extended Chapter 7 — Perimeter, Area and Volume

7.3  Surface Area and Volume of Solids

Volume and surface area of cuboids, prisms, cylinders, spheres, pyramids and cones — which formulas you must learn, which are given, and how to handle parts of shapes.

Volume of a prism: one rule does most of the work

In 7.2 you learned to name the solids and unfold their nets. Now we measure them. Start with the family that dominates exam questions: prisms — solids with the same cross-section all the way through. Every prism, whatever its cross-section, obeys one master rule: find the area of the cross-section, then sweep it along the length.

Key idea The volume of a prism is the area of its cross-section multiplied by its length. Think of the solid as that flat shape stacked up, slice after identical slice. The “length” is always measured perpendicular to the cross-section — the distance between the two matching ends.
V = A × l     where A = area of cross-section Volume of a prism — given in the List of formulas

Any prism: sweep the cross-section along the length

area A length l V = A × l identical slices, stacked along l

Two prisms are so common that their volume formulas are worth knowing as one-liners:

Cuboid — rectangular cross-section

The cross-section is a rectangle of area l × w, swept through the height h:

V = l × w × hLearn this one — it is not in the formula list

Cylinder — circular cross-section

The cross-section is a circle of area πr², swept through the height h:

V = πr²hGiven in the List of formulas
Why this works The syllabus uses “prism” for any solid with a uniform cross-section — even a slice of cheese shaped like a sector of a circle. If you can find the area of the front face, you can find the volume: a sector prism of cross-section area 24 cm² and length 10 cm has volume 240 cm³. No new formula needed.
Example 1The cross-section of a prism is a right-angled triangle with base 6 cm and perpendicular height 5 cm. The prism is 12 cm long. Find its volume.
1
Find the area of the cross-section first — here, a triangle. A = ½ × 6 × 5 = 15 cm²
2
Multiply by the length of the prism. V = A × l = 15 × 12 = 180 cm³
V = 180 cm³
Watch out Use the triangle’s perpendicular height in the area, never the sloping side — and do not confuse the height of the triangle with the length of the prism. Two different measurements, two different jobs.
Exam tip Paper 4 often gives a prism question in two parts: (a) find the cross-section area, (b) find the volume. Even when it does not split the question, write the area line separately — the method mark for A is yours even if the multiplication slips.

Surface area: the area of the net

Surface area is the total area of every face of the solid — exactly the area of its net from 7.2. That is the whole method: picture the net, find each face’s area, add them up. Surface area is measured in square units (cm², m²), volume in cubic units (cm³, m³) — muddling them loses marks instantly.

Cuboid

Six rectangles in three matching pairs — top and bottom, front and back, the two ends:

SA = 2lw + 2lh + 2whLearn it — or just add the six faces

Cube of edge a

Six identical squares:

SA = 6a²Volume is a³

The cylinder is the classic. Peel the label off a tin and it unrolls into a rectangle. Its height is h; its width is the distance once around the circle — the circumference 2πr.

Unrolling a cylinder’s label

r h → width = 2πr h r r curved surface = 2πr × h, plus two circles of area πr² each
Curved surface area = 2πrh      Total = 2πr² + 2πrh Cylinder — the curved part is given; you add the circles yourself
Watch out The List of formulas gives only the curved surface area 2πrh. If the question asks for the total surface area, you must add the two circular ends, 2πr², yourself. Writing down 2πrh alone is the single most common error on this topic.
Example 2A closed cylinder has radius 4 cm and height 10 cm. Find (a) its curved surface area in terms of π, (b) its total surface area, correct to 3 significant figures.
1
(a) The curved surface is the unrolled label: circumference times height. curved SA = 2πrh = 2 × π × 4 × 10 = 80π cm²
2
(b) The cylinder is closed, so add the two circular ends. ends = 2πr² = 2 × π × 4² = 32π cm²
3
Add, keeping π until the very last line, then round. total = 80π + 32π = 112π = 351.858… cm²
(a) 80π cm²    (b) 352 cm² (3 s.f.)
Exam trap Stopping at 80π in part (b) — “total” means every surface. Read whether the cylinder is closed (two ends), open (one end, like a tin with the lid off) or a tube (no ends).
Exam tip “Give your answer in terms of π” means the exact form 112π — no decimals anywhere. If the question says 3 significant figures instead, keep π in the working and press π on the calculator only at the end. Never type 3.14.

Spheres, pyramids and cones

Solids that taper to a point — pyramids and cones — hold exactly one third of the prism or cylinder that would surround them. The sphere has its own pair of formulas. Here is the complete kit, with a column the examiners never print: whether the formula is handed to you.

SolidVolumeSurface areaIn the formula list?
Cuboidlwh2lw + 2lh + 2whNo — learn both
PrismA × ladd up the faces of the netVolume given
Cylinderπr²hcurved 2πrh; total 2πr² + 2πrhVolume and curved SA given
Sphere43πr³4πr²Both given
Pyramid⅓ × base area × hbase + the triangular facesVolume given
Cone⅓πr²hcurved πrl; total πr² + πrlVolume and curved SA given
V = 43πr³      SA = 4πr² Sphere — both given in the List of formulas
Key idea — the cone’s two heights A cone has a vertical height h (straight up the middle, used for volume) and a slant height l (down the sloping surface, used for curved surface area πrl). They are connected by Pythagoras, because r, h and l form a right-angled triangle inside the cone.

Inside a cone: r, h and l make a right-angled triangle

h r l l² = r² + h² volume uses h; curved SA uses l
Why one third? Fill a hollow cone with water and pour it into a cylinder of the same radius and height: it takes exactly three cones to fill the cylinder. The same experiment works for a pyramid inside its matching cuboid. That factor of ⅓ is the only difference between the tapering solids and their prism cousins.
Example 3A cone has base radius 9 cm and vertical height 12 cm. Find (a) its curved surface area in terms of π, (b) its volume to 3 significant figures.
1
The curved surface formula πrl needs the slant height, which is not given — find it first with Pythagoras. l² = r² + h² = 9² + 12² = 81 + 144 = 225
l = √225 = 15 cm
2
(a) Now the curved surface area, exactly. curved SA = πrl = π × 9 × 15 = 135π cm²
3
(b) Volume uses the vertical height, not the slant. V = ⅓πr²h = ⅓ × π × 81 × 12 = 324π = 1017.87… cm³
(a) 135π cm²    (b) 1020 cm³ (3 s.f.)
Exam trap Putting l = 15 into the volume formula, or h = 12 into πrl. Label the two heights before you substitute anything.

Solid volume & surface area calculator

Pick a solid and type its dimensions — watch the substitution, the exact answer in terms of π, and the 3 s.f. value appear line by line.

Composite solids, parts of solids and units

Paper 4’s favourite mensuration question glues two solids together — a cone on a hemisphere (an ice cream), a cylinder with hemispherical ends (a capsule), a cuboid with a half-cylinder roof. There is no new mathematics, only bookkeeping:

Watch out For the surface area of a cone sitting on a hemisphere, you want the cone’s curved surface πrl plus the hemisphere’s curved surface 2πr². Neither circle at the join is on the outside. Adding πr² for a buried face is the standard way to lose the final mark.
Half a sphere is not half the story A solid hemisphere of radius r has volume ⅔πr³ (half the sphere), but its total surface area is 2πr² + πr² = 3πr² — half the sphere’s skin plus the flat circular face made by the cut. Halving 4πr² and stopping is the classic slip.

Frustums: subtract the missing top

A frustum is a cone (or pyramid) with its top sliced off parallel to the base — a plant pot. The syllabus expects you to handle it by subtraction:

Vfrustum = Vlarge cone − Vsmall cone The removed top is a smaller, similar cone

The removed cone is similar to the original, so its radius and height shrink by the same scale factor. If a question gives you the frustum’s two radii, use similar triangles to find the height of the missing cone first.

Units for volume and capacity

Mensuration answers often have to leave in litres. The conversions from 7.2 do the work:

1 m³ = 1 000 000 cm³   ·   1 litre = 1000 cm³   ·   1 m³ = 1000 litres Convert lengths BEFORE calculating, capacity AFTER
Exam tip If a tank is given in metres and the answer is wanted in litres, convert every length to centimetres first, find the volume in cm³, then divide by 1000. Converting a finished m³ answer by the wrong factor (100 instead of 1 000 000) is exactly the error the mark scheme anticipates.

More worked examples

Example 4An ice-cream shape is made from a cone of radius 6 cm and vertical height 8 cm, joined to a hemisphere of radius 6 cm. Find the total volume in terms of π, and to 3 significant figures.
1
Volume of the cone part. Vcone = ⅓πr²h = ⅓ × π × 36 × 8 = 96π cm³
2
Volume of the hemisphere — half the sphere formula. Vhemi = ½ × 43πr³ = ⅔ × π × 216 = 144π cm³
3
Add the exact forms, then evaluate once. V = 96π + 144π = 240π = 753.98… cm³
V = 240π cm³ ≈ 754 cm³ (3 s.f.)
Exam tip Adding 96π + 144π exactly and rounding once beats rounding each part — premature rounding can drift the final digit and cost the accuracy mark.
Example 5A sphere has volume 972π cm³. Find (a) its radius, (b) its surface area to 3 significant figures.
1
(a) Set the volume formula equal to the given volume. The π cancels immediately. 43πr³ = 972π  ⇒  43r³ = 972
2
Solve for r³: multiply by 3, divide by 4. r³ = 972 × ¾ = 729
3
Cube root — not square root. r = ∛729 = 9 cm
4
(b) Now the surface area formula. SA = 4πr² = 4 × π × 81 = 324π = 1017.87… cm²
(a) r = 9 cm    (b) SA = 1020 cm² (3 s.f.)
Exam trap Pressing the square-root key on 729. Volume is cubic, so undoing it needs the cube root: ∛729 = 9, not 27.
Example 6A frustum is made by removing a cone of radius 3 cm and height 6 cm from the top of a cone of radius 6 cm and height 12 cm. Find the volume of the frustum in terms of π.
1
Volume of the full cone. Vlarge = ⅓ × π × 6² × 12 = ⅓ × π × 432 = 144π cm³
2
Volume of the removed top — a similar cone at scale factor ½. Vsmall = ⅓ × π × 3² × 6 = ⅓ × π × 54 = 18π cm³
3
Subtract. V = 144π − 18π = 126π cm³
V = 126π cm³ (≈ 396 cm³)
Why this works The scale factor is ½, so the small cone’s volume is (½)³ = ⅛ of the large one: 144π ÷ 8 = 18π. A quick similarity check like this catches arithmetic slips.

Your turn

Practice set

  1. A rectangular tank measures 2 m by 1.5 m by 0.8 m. Find its volume (a) in m³, (b) in litres.
  2. A closed cylinder has radius 5 cm and height 12 cm. Find (a) its volume in terms of π and to 3 s.f., (b) its total surface area to 3 s.f.
  3. A sphere has radius 4.5 cm. Find its volume and its surface area, each to 3 significant figures.
  4. A square-based pyramid has base edge 10 cm and vertical height 12 cm. Find (a) its volume, (b) its total surface area. (Hint: the slant height of each triangular face runs from the apex to the midpoint of a base edge.)
  5. A cylinder has volume 1000 cm³ and height 8 cm. Find its radius, correct to 3 significant figures.

  1. (a) V = 2 × 1.5 × 0.8 = 2.4 m³  (b) 1 m³ = 1000 litres, so 2400 litres
  2. (a) V = π × 5² × 12 = 300π = 942 cm³ (3 s.f.)  (b) SA = 2π(5)² + 2π(5)(12) = 50π + 120π = 170π = 534 cm² (3 s.f.)
  3. V = 43π(4.5)³ = 121.5π = 382 cm³; SA = 4π(4.5)² = 81π = 254 cm²
  4. (a) V = ⅓ × 10² × 12 = 400 cm³  (b) face slant height = √(12² + 5²) = √169 = 13; SA = 10² + 4 × ½ × 10 × 13 = 100 + 260 = 360 cm²
  5. πr² × 8 = 1000  ⇒  r² = 1000 ÷ (8π) = 39.788… so r = √39.788… = 6.31 cm (3 s.f.)

Key points to remember

  • Every prism: V = cross-section area × length. Cuboid lwh and cylinder πr²h are just special cases.
  • Surface area = area of the net. Cylinder total: 2πr² + 2πrh — the formula list gives only the curved part 2πrh.
  • Tapering solids take one third: pyramid ⅓ × base area × h, cone ⅓πr²h. Sphere: V = 43πr³, SA = 4πr².
  • Cone: volume uses the vertical height h, curved surface πrl uses the slant height, linked by l² = r² + h².
  • Solid hemisphere: V = ⅔πr³ but SA = 3πr² — do not forget the flat circular face.
  • Composite solids: add or subtract volumes; for surface area count only exposed faces. A frustum is large cone minus similar small cone.
  • Keep answers in terms of π until the final line, then round to 3 s.f.; 1 litre = 1000 cm³ and 1 m³ = 1000 litres.

Where next?

✅ Mark scheme All notes

Progress is saved on this device only and appears on the notes home page.